Fits Picatinny & weaver style mounts and are NATO-STANAG compatible.
Light Weight
SPECIFICATIONS:
Tube size 34mm
Weight: 7.1oz
7075 T6 aluminum billet
MSR ideal height (1.39")
Hard Coat Anodized Finish
Material: Aluminum
Warne's Lifetime Warranty
[summary]
The Warne® Skyline® Precision Mount has been engineered from the ground up with the precision rifle shooter/competitor in mind. Machined from 7075 T6 aluminum billet, and featuring 2 integral recoil lugs along with 4 mounting crossbolts, the precision mount easily handles the rigors of competition or hard use environments. The STANAG rail interface allows for more precise mount alignment, and return to zero capability than a traditional Mil Spec 1913 Picatinny interface while still being compatible with all picatinny rails. The Warne Skyline Precision Mount features a wide assortment of accessories that mount directly to 10 different interfaces on the scope rings. Look for Warne's complete line of Skyline Precision Shooting Accessories at your favorite retailer. Accessory placement allows the scope tube to be free and easily moved front to back for precise eye relief and is a much more efficient way to mount accessories. Shooters can add these optional accessories:
Loosen 4 cross bolts with a T-20 wrench and install on your picatinny style rail.
Tighten cross bolts snug and follow the recommended pattern for final tightening.
Warne recommends torquing the cross bolts in the order of 2, 3, 1, 4 to 40 in/lb max.
Remove the 4 cap screws from each top cap with the supplied T-15 wrench and remove the top caps.
Place your scope in the mount and replace the top caps and screws*.
Slowly tighten cap screws evenly and leave loose enough to adjust for eye relief and level the reticle and tighten the cap screws in a criss-cross pattern to scope manufacturers’ recommended torque rating**, 18 in/lb maximum.
*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes
You must be of legal age to access this site. Atibal's website is intended for adults who meet the legal age requirements in their jurisdiction. By entering, you confirm that you are of legal age in your area.
Come back when you're older
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
Are you sure?
Choosing a selection results in a full page refresh.
