WARNE QUICK DETACH (QD) EXTND SKELETON 34MM

-20%

$199.99

$249.99

  • Brand: Warne
  • Availability: Out Of Stock

Warne's 1 piece QD XSKEL cantilever mount features Patent Pending Dual Quick Detach levers and is constructed from 6061 T6 aluminum for a lightweight and rigid foundation. Steel threaded inserts ensure steel on steel contact between all threaded interfaces, and MSR Ideal Height helps the shooter maintain a proper cheek weld and shooting position with any optic on flat top guns. The QDXSKEL gives you a generous forward cantilever for modern scopes while reducing weight with its skeletonized design, and the Return-to-Zero performance that Warne is known for.

    • Due to small variances in rail dimensions, Warne® recommends that you first adjust the lever tension to your rail prior to scope mounting.
    • Adjusting the QD Lever Tension: Place the QD X-SKEL onto your firearm’s rail*. One at a time, slowly begin closing the QD levers and adjust tensioning nuts until the levers just meet the latch with minor resistance. (see figure 2) Warne recommends that you periodically check lever tension and adjust as needed, also re-adjust if mounting on a different firearm(s).
    • Close the lever, latch should “click” into lever with a moderate push and the Bipod will feel secure on the rail.

 

 

*Warne® recommends installing the mount with the cantilever forward and the front cross bolt in the farthest forward slot on AR15 Flat Tops.

  • Mounting Instructions: Loosen both QD levers on the QD X-SKEL mount and install on your firearm’s rail.
  • Push the mount towards the muzzle until it stops and close the levers. Latch should “click” into levers with a moderate push and the mount will feel secure on the rail.
  • Remove the four cap screws from each top cap with the supplied T-15 wrench and remove the top caps and place your scope in the mount and replace the top caps and screws. Do not use thread locking compound on cap screws - this will cause the steel threaded inserts to back out of the caps.
  • Slowly tighten* cap screws evenly and leave loose enough to adjust for eye relief and level the reticle.
  • Tighten the cap screws in a criss-cross pattern to scope manufacturers’ recommended torque rating**, 25 in/lb maximum.

*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND

**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

FEATURES:

American Made
Fully CNC Machined
High-Grade Lightweight Aircraft Aluminum
Over 2 inches of forward Cantilever.
Light Weight
SPECIFICATIONS:
Tube size 34mm
Weight: 8.5oz
MSR Ideal Height
Centerline Height: 1.43"
Quick Detach
Material: Aluminum 
Warne's Lifetime Warranty

 

 

 

No gimmicky names or slogans to make our Lifetime Warranty sound better than what it is.  At Atibal we call our Lifetime Warranty a Lifetime Warranty.  If your Atibal product becomes defective, broken, or is no longer working we will get it repaired or replaced. It's that simple.

 

If you need to inquire about our warranty or would like to replace or return an ATIBAL product, email us at info@atibalsights.com and request a Return Authorization Request Form. Completed form must be included with return to ensure proper handling and processing.


PLEASE NOTE THAT ATIBAL'S LIFETIME WARRANTY DOES NOT APPLY TO THERMAL IMAGING DEVICES. THERMAL IMAGING DEVICES FROM ATIBAL FEATURE A LIMITED WARRANTY. FOR MORE INFORMATION ON ATIBAL'S THERMAL DEVICE WARRANTY PLEASE CONTACT ATIBAL DIRECTLY